0.8mm PCB Drill Bit PCB Drilling Bit are cutting tools used to remove material to create holes, almost always of circular cross-section. 0.8mm PCB Drill Bit PCB Drilling Bit come in many sizes and shapes and can create different kinds of holes in many different materials. In order to create holes, drill bits are usually attached to a drill, which powers them to cut through the workpiece, typically by rotation. The drill will grasp the upper end of a bit called the shank in the chuck
If you’ve started designing your own PCBs in egale or Kicad and want to make your PCB a reality, you may start out with an etching system to pattern out traces. But that’s only half the job! You’ll also need a way to drill some tiny and accurate holes. That’s why we’ve started selling these PCB drill tips in a variety of sizes.
They’re made from carbide (tungsten steel) and are suitable for circuit boards, electronics, SMT, molding, metal processing, telecommunications, and other uses. Each drill tip has a high hardness, wear resistance and strength and they’re also super sharp which helps when drilling through PCBs. The drill bits also don’t easily bend or break and come in a nice plastic case to store your tips when you’re not using them.
No posts found
UG21 1st Floor Qazi Electronics Center ,
Opposite State Bank Near Milli Shoes Mall Road
Powered By Digilog Electronics