Need 3v to run a project on AA batteries? This is a simple battery holder that we use in some of our kits. What we like about these are the leads that come pre-attached, ready to be soldered to a , or attached with your choice of connector.
Features of 2xAA Battery Cell Holder Square Case Housing:
Two mounting holes to accept flush head screws.
You can also use high adhesive double sided tape, or a glue to attach to your project or prototype.
This battery holder have two wires 6 inch of 24-gauge leads that have 5 mm of insulation stripped off of the ends.
Specifications of 2xAA Battery Cell Holder Square Case Housing: