This module is easy to use and powerful!!!
A module has 3 functions to meet your most occasions! !!
- High power, high efficiency, 5A, low ripple;
- Three in one:
- ( 1 ) Used as a normal buck module with overcurrent protection capability;( 2 ) Used as a charger for various voltage value lithium batteries, batteries, nickel-cadmium nickel-hydrogen batteries (battery packs), for solar panels, wind turbines, etc.;( 3 ) used as high power LED constant current drive module;
- There are two modes of constant voltage and constant current, and there are indicators to indicate which mode the module is currently in;
- When used as a lithium battery charger, you can set the float voltage and charge current.
- Is it charging or already full;
- With current limiting protection, the module will not burn out even if the output is short-circuited.
- Input voltage: 4-38V
- Output voltage: 1.25-36V continuously adjustable
- Output current: adjustable, up to 5A
- Output power: up to 75W
- Working temperature: -40~+85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96%
- Short circuit protection: Yes (limited current 8A)
- Over-temperature protection: Yes (automatically turn off the output after over temperature)
- Input reverse connection protection: None, (If necessary, please input a large current diode in the input string)
- Installation: 4 Ke 3mm screws
- Wiring method: terminal block or soldering terminal, V-IN is input, V-OUT is output
1X5A constant current voltage LED drive lithium-ion battery charging adjustable step-down power supply module board