ADF4351 RF Signal Generator Module Development Board In Pakistan

List price: Rs. 5,000
Rs. 4,000
You save: Rs. 1,000 (20%)
B66
In stock
+

Description

The ADF4351 allows the implementation of fractional-N or integer-N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and the external reference frequency. The ADF4351 has an integrated voltage-controlled oscillator (VCO) with a fundamental output frequency ranging from 2200 MHz to 4400 MHz. In addition, divide-by-1/-2/-4/-8/-16/-32/-64 circuits allow the user to generate RF output frequencies as low as 35 MHz. For applications that require isolation, the RF output stage can be muted. The mute function is both pin- and software-controllable. An auxiliary RF output is also available, which can be powered down when not in use. Control of all on-chip registers is through a simple 3-wire interface. The device operates with a power supply ranging from 3.0 V to 3.6 V and can be powered down when not in use

APPLICATIONS :

Wireless infrastructure (W-CDMA, TD-SCDMA, WiMAX, GSM, PCS, DCS, DECT) Test equipment Wireless LANs, CATV equipment Clock generation

Specifications:

  1. Frequency range: ADF4351: 35M-4.4G
  2. Power supply: DC002 Interface DC4-9V typical 5V
  3. Output signal: 2.2-4.4G fundamental wave (sine wave)
  4. Output signal interface: SMA female
  5. Control: three-wire SPI control pins and lead locking pin allows all state functions, including point frequency sweep and frequency hopping, stepping to be 1K, low-frequency step can be to 0.1K, the crystal. to decide.
  6. Size(Length x Width): 4848*36.5mm
  7. Connector Dia.: 6.5mm

Package Includes

1 x ADF4351 Development Board

Link to DataSheet of ADF4351

Datasheet of ADF4351

 

Reviews

No posts found

Write a review