AMG8833 IR 8*8 Thermal Imager Array Temperature Sensor Module is an 8×8 array of IR thermal sensors. When connected to your microcontroller (or Raspberry Pi) it will return an array of 64 individual infrared temperature readings over I2C. It’s like those fancy thermal cameras, but compact and simple enough for easy integration. AMG8833 IR 8*8 Thermal Imager Array Temperature Sensor Module is available now in Pakistan. AMG8833 IR 8*8 Thermal Imager Array Temperature Sensor Module will measure temperatures ranging from 0°C to 80°C (32°F to 176°F) with an accuracy of +- 2.5°C (4.5°F). It can detect a human from a distance of up to 7 meters (23) feet. With a maximum frame rate of 10Hz, It’s perfect for creating your own human detector or mini thermal camera. We have code for using this breakout on an Arduino or compatible (the sensor communicates over I2C) or on a Raspberry Pi with Python. On the Pi, with a bit of image processing help from the SciPy python library, we were able to interpolate the 8×8 grid and get some pretty nice results. The AMG8833 is the next generation of 8×8 thermal IR sensors and offers higher performance than it’s predecessor the AMG8831. The sensor only supports I2C and has a configurable interrupt pin that can fire when any individual pixel goes above or below thresholds that you set.
To make it easy to use, we pick & placed it on a breakout board with a 3.3V regulator and level shifting. So you can use it with any 3V or 5V microcontroller or computer.
|Input Voltage (Volt)||
3.3 – 5
|Operating Temperature Range||
0 °C to 80 °C +32 °F to +176 °F
|Storage Temperature Range||
−20 °C to 80 °C –4 °F to +176 °F
|Output sink current (mA)||
|Human detection distance (meter)||
|Viewing angle (degree)||
|Current consumption (mA)||
4.5 (normal mode)
|Number of pixel||
64 (Vertical 8 × Horizontal 8 Matrix)
I2C (fast mode)
Typical 10 frames/sec or 1 frame/sec
17.5 x 17.5 x 7
4 × 3 × 1 cm
For Code and Wiring, testing Click Here.
How thermal camera detects :
No posts found