اپنا آرڈر کنفرم کرنے کے لئے اپنا آرڈر نمبر آرڈر ڈیپارٹمنٹ03228017104  کو میسج کریں. 

ARDUINO BASICS KIT For IT Lab Punjab Government eproc.punjab.gov.pk

On Demand Product

Rs. 5,300
In stock
+

  

This is Arduino Basic Kit price for punjab government order. here are list of  required products. 

ARDUINO BASICS KIT
Sr. Item(s) Image Item Details Qty
1 Arduino UNO R3 Microcontroller ATmega328P DIP ATMEGA32u4 USB Convertor Operating Voltage        5V
Input Voltage 7-12V
Input Voltage (limit)        6-20V Digital I/O Pins 14
PWM Digital I/O Pins 6 Analog Input Pins        6
Flash Memory        32 KB (ATmega328P) of which
0.5 KB used by bootloader SRAM        2 KB (ATmega328P) EEPROM        1 KB
Clock Speed        16 MHz LED_BUILTIN        13
1
2 Arduino Cable USB 2.0 Cable Type A/B Shielded
Heavy Duty
Connect Arduino Uno or any board with the USB female A port of your computer.
1
3 Arduino UNO Case Arduino Uno Enclosure - Clear Plastic
The enclosure provides slots to access each header, USB port, power jack, the reset button,  AREF and ICSP connectors, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots.
All of the status LEDs on the Uno are visible through the case thanks to light pipes embedded in the design.
1
4 Power Adaptor High quality switching 'wall wart' AC to DC 9V 1000mA wall power supply manufactured specifically for Electronics. These are switch mode power supplies which mean the output is regulated to 9V  and the capable output current is much higher (1000mA!).
These will power most projects that don't require more than 1000mA of current.
Works with most devices that use a 9V adaptor and
less than 1A of power.
1
5 Prototyping Board  

Bitmap Bitmap Bitmap Bitmap Model: MB-102
Dimension: 16.7 x 5.7 x 1cm
Tie Points: 830 tie points (consists of: 630 tie-point terminal strip, 200 tie-point distribution strips) Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
Wire size: Suitable for 20~29 AWG (0.3mm~0.8mm) wires
1

 

6 LED Red 5mm 5mm Diffused
1.8-2.2VDC  forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd
5
7 LED Green 5mm 5mm Diffused
1.8-2.2VDC  forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd
5
8 LED Blue 5mm 5mm Diffused
1.8-2.2VDC  forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd
5
9 RESISTOR 220R (10 Pcs
Pack)
220 Ohm Resistance 10pcs pack
1/4 Watt PTH
Thick Leads Tolerance: +/-5 ohms
1
10 RESISTOR 1K  (10 Pcs
Pack)
1 kilo Ohm Resistance 10pcs pack
1/4 Watt PTH
Thick Leads Tolerance: +/-5 ohms
1
11 RESISTOR 10K  (10 Pcs
Pack)
10 kilo Ohm Resistance 10pcs pack
1/4 Watt PTH
Thick Leads Tolerance: +/-5 ohms
1
12 Jumper Wire: Male to Male Bundle
65 Pcs
65 Pcs Pack Length:
25 cm x 4 Pcs
20 cm x 4 Pcs
15 cm x 8 Pcs
10 cm x 49 Pcs
0.1" male header contacts on both ends
Standard 0.1" (2.54mm) spacing when placed next to each other
Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black
Gauge: 28 AWG (0.0126”)
1
13 Jumper Wire: Male to Female strip 10 Pcs 10 Pcs Pack Length: 30cm
0.1" Female header contacts on one end, 0.1" male header contacts on other end
Standard 0.1" (2.54mm) spacing when placed next to each other
Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black
Gauge: 28 AWG (0.0126”)
1
14 Potentiometer 50k 1x Rotary Potentiometer -  50k Ohm, Logarithmic 1x Mounting Nut
1x Washer
Electrical Characteristics Taper: Linear, audio
Standard Resistance Range: 1K  -  10K  ohms Standard Resistance Tolerance: ±20 % Residual Resistance: 1 % max.
Environmental Characteristics
Operating Temperature ...-10 °C  to +50 °C  Power Rating Linear: 0.2 watt
Dual Section: 0.125 watt Audio: 0.1 watt
Dual Section: 0.06 watt Maximum Operating Voltage Linear : 200 V
Audio: 150 V
Sliding Noise: 47 mV max
1

 

15 Active Buzzer Rated  Voltage: 6V DC Operating Voltage: 4-8V DC Rated  current: <30mA
Sound&