Skip to product information
1 of 3

Arduino Pro Micro 5v 16m Atmega32u Rubber Ducky Rubberducky

Arduino Pro Micro 5v 16m Atmega32u Rubber Ducky Rubberducky

Regular price Rs 1,275
Regular price Sale price Rs 1,275
Sale Sold out
Shipping calculated at checkout.

SKU:B760,IMP10,Th5,SA

NOTIFY ME WHEN IN STOCK

Online Shopping website for Arduino Pro Micro 5V. Here you get Arduino Pro Micro in reasonable price in karachi, lahore, islamabad, rawalpindi, peshawar and all over pakistan. Built project or product with Arduino Pro Micro 5V.This Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with. Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like. There is a voltage regulator on board, so it can accept up to 12V DC.

The Arduino Pro Micro 5V 16M Atmega32u4 has a flash program storage capacity of 32KB. This is the amount of memory available to store the program code that runs on the microcontroller. In addition to flash memory, the Pro Micro also has 2.5KB of SRAM and 1KB of EEPROM memory. These can be used to store data during program execution or to store configuration information that needs to persist across power cycles. It's worth noting that the actual amount of usable memory may be slightly less than the stated capacity, as some of it may be reserved for system use or overhead.

The Arduino Pro Micro 5V 16M Atmega32u board does not have built-in storage capacity for storing data or programs.

However, it can be programmed to function as a USB Human Interface Device (HID) such as a keyboard or mouse, which can be used to execute keystroke injection attacks commonly known as "Rubber Ducky" attacks.

In this case, the storage capacity for the malicious payload would depend on the available storage space on the target computer where the payloads are executed. The Arduino Pro Micro acts as a controller to execute pre-programmed keystrokes or commands that can manipulate the target computer's file system or execute programs, depending on the payload.

If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits.


Features:

  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection

Package Includes:

1 x Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino

 Arduino Pro Micro 5v 16m Atmega32u Rubber Ducky Rubberducky

 Arduino Pro Micro 5v 16m Atmega32u Rubber Ducky Rubberducky

View full details

Description

Online Shopping website for Arduino Pro Micro 5V. Here you get Arduino Pro Micro in reasonable price in karachi, lahore, islamabad, rawalpindi, peshawar and all over pakistan. Built project or product with Arduino Pro Micro 5V.This Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with. Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like. There is a voltage regulator on board, so it can accept up to 12V DC.

The Arduino Pro Micro 5V 16M Atmega32u4 has a flash program storage capacity of 32KB. This is the amount of memory available to store the program code that runs on the microcontroller. In addition to flash memory, the Pro Micro also has 2.5KB of SRAM and 1KB of EEPROM memory. These can be used to store data during program execution or to store configuration information that needs to persist across power cycles. It's worth noting that the actual amount of usable memory may be slightly less than the stated capacity, as some of it may be reserved for system use or overhead.

The Arduino Pro Micro 5V 16M Atmega32u board does not have built-in storage capacity for storing data or programs.

However, it can be programmed to function as a USB Human Interface Device (HID) such as a keyboard or mouse, which can be used to execute keystroke injection attacks commonly known as "Rubber Ducky" attacks.

In this case, the storage capacity for the malicious payload would depend on the available storage space on the target computer where the payloads are executed. The Arduino Pro Micro acts as a controller to execute pre-programmed keystrokes or commands that can manipulate the target computer's file system or execute programs, depending on the payload.

If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits.


Features:

  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection

Package Includes:

1 x Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino

 Arduino Pro Micro 5v 16m Atmega32u Rubber Ducky Rubberducky

 Arduino Pro Micro 5v 16m Atmega32u Rubber Ducky Rubberducky

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
r
raza baqir

good quality, recommended

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
r
raza baqir

good quality, recommended