Arduino Uno R3 Arduino Uno Arduino Kit Arduino Uno R3 In Pakistan

In stock
2001-S 160

Rs. 585

The Arduino Uno R3 is an open source hardware computing platform. It uses the ATmega328 microcontroller. The board also incorporates the ATmega16u2 to act as a onboard USB to serial converter. The Arduino Uno R3 can be used to develop applications that operate in a standalone or connected enviroment. The device is programmed using the Arduino integrated development enviroment (IDE).This is basic arduino kit for every beginners.

Our quantity discounts:
Quantity 20+ 50+
Price Rs. 579 Rs. 567
+

Arduino Uno R3 In Pakistan Arduino Uno In Pakistan is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs – light on a sensor, a finger on a button, or a Twitter message – and turn it into an output – activating a motor, turning on an LED, publishing something online. You can tell your board what to do by sending a set of instructions to the microcontroller on the board. To do so you use the Arduino programming language (based on Wiring), and the Arduino Software (IDE), based on Processing.

Over the years Arduino has been the brain of thousands of projects, from everyday objects to complex scientific instruments. A worldwide community of makers – students, hobbyists, artists, programmers, and professionals – has gathered around this open-source platform, their contributions have added up to an incredible amount of accessible knowledge that can be of great help to novices and experts alike.

Arduino was born at the Ivrea Interaction Design Institute as an easy tool for fast prototyping, aimed at students without a background in electronics and programming. As soon as it reached a wider community, the Arduino board started changing to adapt to new needs and challenges, differentiating its offer from simple 8-bit boards to products for IoT applications, wearable, 3D printing, and embedded environments. All Arduino boards are completely open-source, empowering users to build them independently and eventually adapt them to their particular needs. The software, too, is open-source, and it is growing through the contributions of users worldwide.

Overview

Arduino/Genuino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

“Uno” means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.

You can find here your board warranty informations.

Getting Started

You can find in the Getting Started section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics.

Need Help?

  1. Microcontroller ATmega328
  2. Operating Voltage 5V
  3. Input Voltage (recommended) 7-12V
  4. Input Voltage (limits) 6-20V
  5. Digital I/O Pins 14 (of which 6 provide PWM output)
  6. Analog Input Pins 6
  7. DC Current per I/O Pin 40 mA
  8. DC Current for 3.3V Pin 150 mA
  9. Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
  10. 2 KB (ATmega328) EEPROM
  11. 1 KB (ATmega328)
Clock Speed 16 MHz


No posts found

Write a review