Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller

ATMEL
Ask price →
B178,TMD,Th50,KRT
In stock

Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller is a high performance, low power controller from Microchip. Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. The package can be programmed in circuit. 1.8V to 5V operating voltage. ATMEGA328P is an 8-bit microcontroller based on AVR RISC architecture. It is the most popular of all AVR controllers as it is used in ARDUINO boards.

Features of Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller:

  • Practically does the work for you, durable and useful.
  • Good reliability and lifelong lasting time are useful and durable.
  • Only an ATmega328 in DIP package, without the optiboot bootloader pre-loaded.
  • You have to use code in your custom embedded project.
  • It's like the ATmega168, with double the flash space.
  • 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC.
  • Runs up to 20MHz with external crystal.
  • Package can be programmed in circuit. 1.8V to 5V operating voltage!
  • To get this chip working with IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection.

Specifications of Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller:

  1. 4.5V-5.5V operating range
  2. Up to 20MHz
  3. Part: ATMEGA328P-AU
  4. 32kB Flash program memory
  5. 1kB EEPROM
  6. 2kB Internal SRAM
  7. Two8-bit Timer/Counters
  8. One16-bit Timer/Counter
  9. RTC with separate oscillator
  10. 6 PWM Channels
  11. 8 Channel 10-bit ADC
  12. Serial USART
  13. Master/Slave SPI interface
  14. 2-wire (I2C) interface
  15. Watchdog timer
  16. Analog comparator
  17. 23 IO lines
  18. Data retention: 20 years at 85oC/ 100 years at 25oC

Package includes:

  • 1 x Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller

Documents:

Image result for atmega328p

Good Quality, But before using it, you have to burn BootLoader using Arduino UNO
Best product
Write a review

.