Esp 8285 Smart WiFi Module Develop Wireless Networking Intelligent Module in Pakistan

On-Demand

Rs. 1,000
Out of stock
Add to comparison list

TYWE2S is a low power consumption module with a built-in Wi-Fi connectivity solution. The Wi-Fi Module consists of a highly integrated wireless radio chip ESP8266EX and extra flash which has been programmed with Wi-Fi network protocol and plenty of software examples.TYWE1S also has an 32-bit CPU, 1M byte flash, 50k SRAM and various peripheral resources.

TYWE2S is an RTOS platform, embedded with all the Wi-Fi MAC and TCP/IP protocol function examples, users can customize their Wi-Fi product by using these software examples.

The figure shows the block diagram of the TYWE2S.
Esp 8285 Tuya Tywe2s Smart WiFi Module Develop Wireless Networking Intelligent Module
 

Features

  • Integrated low power consumption 32-bit CPU, also known as application processor Basic frequency can support both 80MHz and 160MHz Supply voltage range: 3V to 3.6V Peripherals: 5×GPIOs, 1×UART, 1×ADC Wi-Fi connectivity:
  • 802.11 b/g/n Channel 1 to 14 @ 2.4GHz Support WPA/WPA2 +20dBm output power in 802.11b mode Support STA/AP/STA+AP operation mode Support Smart Link function for both Android and iOS devices Standby power consumption is less than 0.1 mW (DTIM3) On-board PCB antenna, or IPEX connector for external antenna CE, FCC certified Operating temperature range: -20ºC to 85ºC

Main Application Fields

  • Intelligent Building Intelligent home, Intelligent household applications Health care Industrial wireless control Baby monitor Webcam Intelligent bus

Dimensions and Footprint

Dimensions

TYWE2S has 2 columns of Pins (2* 9). The distance between each Pin is 2mm. Size of TYWE1S: 3 mm(W)* 15mm(L) * 17.3mm(H)Esp 8285 Tuya Tywe2s Smart WiFi Module Develop Wireless Networking Intelligent Module

Pin Definition

Pin Number Symbol IO type Function
1 3V3 P Module Power Pin(3.3V)
2 05 I/O GPIO_05
3 GND P Power Reference Ground
4 04 I/O GPIO_04
5 RX I/O UART0_RXD(2)
6 13 I/O GPIO_13
7 TX I/O UART0_TXD(2)
8 AD AI ADC port, 10-bit precision SAR ADC
9 12 I/O GPIO_12
10 RST I/O Hardware reset pin (low level effective, internal pull-up resistance)
11 14 I/O GPIO_14

Instructions:P indicates the power pin,I/O means input and output pins,AI represents the analog input pin. RST is just module hardware reset pin, can't clear the WiFi distribution network. (1): This pin can only be used as an ADC port, can not be used as a normal IO port, need to be suspended when not in use. When used to ad an ADC input, the input voltage range is limited to 0~1.0V. (2): UARTO is the user serial port, when the module is powered om, serial port has information output, the user can ignore.

Pin Number Symbol IO type Function
- IO4 I/O GPIO_04
- IO13 I/O GPIO_13
- IO2 I/O UART0_TXD(Module information print port)
- RST I/O Reset pin
- IO5 I/O GPIO_05
- IO0 I/O IO0 participates in the module startup when the module is suspended, the module enters the normal running state.

Instructions:I/O means input and output pins. I/O0 is left floating, the module is running normally, IO0 is low level, and the module is in firmware burning state. A test pin is not recommended.

PCB Packaging

Mechanical Dimensions

Esp 8285 Tuya Tywe2s Smart WiFi Module Develop Wireless Networking Intelligent Module

PCB Recommended Package

Esp 8285 Tuya Tywe2s Smart WiFi Module Develop Wireless Networking Intelligent Module

Package Includes:

1 x Esp 8285 Smart WiFi Module Develop Wireless Networking Intelligent Module 

No posts found

Write a review

.