The NodeMCU is a wonderful development tool for prototyping, creating, and building IoT (Internet of Things) and any random electronic project that requires a microcontroller and/or WiFi access, it can even be used in place of Arduino in many cases.
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ESP8266, the onboard SoC, has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during run time. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
|1||ESP8266 WI-FI Nodemcu board||1|
|2||Micro USB cable||1|
|3||I2C 1602 LCD Display Screen||1|
|4||SG90 Servo Engine||1|
|5||DHT11 Temp & Humi Sensor module||1|
|6||2 Relay module||1|
|7||Stepper motors bridge||1|
|8||potentiometer (10 k variable resistor)||3|
|10||LDR Module 4 PIN||3|
|11||Infrared receiver (VS1838B)||1|
|12||Infrared remote control||1|
|13||LED (6x white, 6X red, 6x Yellow, 6X green)||24|
|14||push Buttons Caps||5|
|15||Resistors (20X 470ohm, 20x 10k, 20x 1Kohm, 1Mohm)||65|
|16||Jump pins wire M to M||1|
|17||Jump pins M to F||1|
|18||Jump pins F to F||1|
|19||Bread board MB102||1|
No posts found