Arduino Nano With Micro USB Port Atmega328

This is Micro USB port-based Arduino Nano which is the latest model of Arduino nano which is operating on 5V and 16Mhz crystal frequency with atmega328p  Micro-controller.  

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x)  It has more or less the same functionality of the Arduino Uno but in a different package. Arduino Nano lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.

Specifications of Arduino Nano With Micro USB Port;

1. Microcontroller : ATmega328 (arduino nano).
2. Operating Voltage (logic level) : l5 V.
3. Input Voltage (recommended) : 7-12 V.
4. Input Voltage (limits) : 6-20 V.
5. Digital I/O Pins : 14 (of which 6 provide PWM output).
6. Analog Input Pins : 8.
7. DC Current per I/O Pin : 40 mA.
8. Flash Memory : 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by boot loader.
9. SRAM : 1 KB (ATmega168) or 2 KB (ATmega328).
10. EEPROM : 512 bytes (ATmega168) or 1 KB (ATmega328).
11. Clock Speed : 16 MHz.
12. Dimensions : 0.73" x 1.70".
13. Length : 45 mm.
14. Width : 18 mm.
15. Weigth : 5 g.

Features of Arduino Nano With Micro USB Port:

1. Automatic reset during program download
2. Power OK blue LED
3. Green (TX), red (RX) and orange (L) LED
4. Auto sensing/switching power input
5. Small mini-B USB for programming and serial monitor
6. ICSP header for direct program download
7. Standard 0.1” spacing DIP (breadboard friendly)
8. Manual reset switch

Related documents:

1. IC CH340G Datasheet here
2. IC Atmel ATmega 328 Datasheet here

Package includes:

• 1 x  Arduino Nano V3 Arduino Nano With Unsoldered Headers