اپنا آرڈر کنفرم کرنے کے لئے اپنا آرڈر نمبر آرڈر ڈیپارٹمنٹ03228017104  کو میسج کریں. 

Raspberry Pi 4 B Model B Starter Kit 8GB RAM and 32GB SD Card

LABISTS

Advance Payment Only

Rs. 28,000
Out of stock
  • Highest RAM for a Raspberry Pi (8GB) offers high-performance: Raspberry Pi 4 8 RAM featrues with new SOC Broadcom BCM2711, High-performance 1.5GHz Quad-Core 64-bit Arm Cortex A72 CPU. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K. Dual-band 2.4GHz/5GHz Wi-Fi & Bluetooth 5.0 for faster connectivity. Transfers via 2 USB 3.0 ports up to 10 times faster, 4 Gb / s or 500 MB / s. High-speed Gigabit Ethernet Connector
  • 5.1V 3A USB-C Power Supply with on/off Switch(1.5M/5Feet), with Noise Filter, specially designed for the Raspberry Pi 4 Model B, it keeps your Pi 4B operating smoothly and at peak performance, easily press button to power on/off Raspberry Pi 4 board; Equipped with high quality 1.5M/5Feet Micro HDMI to HDMI Cable for connection to full HDMI displays
  • With LABISTS customized premium raspberry pi 4 Red Case, offer your pi 4 good protection, easy to access to all ports, featured with a camera port for easy install and use of the raspberry pi camera module(not included). Double cooling with 1 cooling fan and excellent heatsink, no more worry about overheating while the pi working; Comes with a Raspberry Pi quick start guide help you get started easily
  • Equipped with Raspberry Pi 4 Heatsink Fan:1 heatsink fan and premium heat sink for impeccable heat dissipation, better than those only two aluminum heatsinks. Comes with install tools, easily setup within 1 minute. A real raspberry pi 4 Model B 8GB RAM complete Starter Kit which is must needed for learning code, developing new projects, and even office works.
  • Equipped with Necessary Accessories And You Can Turn It On Immediately: 1 * Raspberry Pi 4 Model B 8GB; 1 * 5.1V 3A power supply 1.3m with switch; 1 * 32GB SanDisk Micro SD card preloaded with Raspbian; 1 * Red case for Pi 4B; 1 * Fan; 1 * heat sink; 1 * Card reader compatible with USB-A & USB-C; 2 * HDMI to HDMI micro cables; 1 * Screwdriver; 1 * LABISTS Raspberry Pi quick start guide

LABISTS Raspberry Pi 4 Model B 8GB RAM Complete Starter Kit with 32GB Micro SD Card Preloaded Raspberry Pi OS (Raspbian) 

 

Raspberry Pi 4 Model B 8GB RAM cooperated with quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz gives full play to the CPU performance and RAM advantage.

CPU up to 3 Times Faster

Raspberry Pi 4 8GB RAM with 1.5GHz quad-core ARM Cortex-A72 CPU, 3x performance boost over the previous model, delivers a 500Mhz speed for stronger processing power but using less energy.

Updated Bluetooth 5.0

Bluetooth 5.0 (4.2 on the Raspberry Pi 3 B+) means you'll get twice the speed (2 Mbit/s) and 4 times the range (50m outdoors, 10m indoors) than the previous generation. Dual-band 802.11 b/g/n/ac wireless LAN for quick wireless networking with less interference and better reception.

Dual Displays, 4K Output

Dual micro-HDMI ports support up to 4K/60fps, perfect to connect your Raspberry Pi 4 with much larger displays with crisp, sharp, high resolution. H.265 4Kp60 hardware decoding supports to watch 4K movies in your favourite media centre distro.

2 USB 3.0 & 2 USB 2.0

LABISTS Raspberry Pi 4 has two USB 3.0 ports for up to 10x faster transfer speeds than USB 2.0, perfect for connecting fast peripherals like SSDs and flash drives. 2 USB 2.0 ports for connecting less speed-dependent peripherals like keyboards and mice.

Raspberry Pi 4 Case with GPIO Access

Offers your Raspberry pi 4 good protection, easy access to GPIO port, HDMI port, USB port, SD Card slot of Raspberry Pi board. The aside gpio port of the case is convenient to connect GPIO devices and lines for easy operation.

Impeccable Heat Dissipation Effect

Comes with a large metal heat sink and double fans for impeccable heat dissipation, easily control the temperature below 50 degrees. Holes on the top and bottom of the case ensure better heat dissipation.

5.1V/3A USB-C Power Supply

1.5M/5 Feet USB-C Power Supply with Noise Filter & On/Off Switch - Specially designed for the Raspberry Pi 4 (UL Listed); Features: 5.1V 3A, 15.3 Watts; Thick & durable, designed for low-loss power transfer.

No posts found

Write a review

.