STC 3008 STC-3018 STC-3028 Dual Digital Temperature Humidity Controller Thermostat 10A With NTC Probe Thermoregulatory.
- ABS flame retardant plastic shell, more safe to use.
- Microcomputer intelligent digital display thermostat, dual display dual temperature.
- Suitable for automatic switching of refrigeration and heating devices such as seafood machines and cooling water machines.
- The large and clear digital display shows measuring temperature, high accuracy of temperature measuring and controlling.
- With wide temperature measuring range and controlling range, comes with a integrated sensor.
- Front panel size: 75×34.5(mm)
- Assembly size: 71×29(mm)
- Product size: 75×34.5×85 (mm)
- Sensor length: 1 meter (including the probe)
- Range: -55-120 Celsius Accuracy:
- 0.1 Celsius Sensor error delay: 1 minute
- Power supply: DC 12V DC 24V AC 110-220V
- Sensor: NTC sensor
- Relay contact capacity: Cool (10A/240VAC); Heat
- (10A/240VAC) Ambient temperature: 0-60
- Celsius Storage temperature: -30-75 Celsius
- Relative humidity: 20-85% (No condensate)
- Can display the temperature and humidity simultaneously.
- High accuracy and wide measuring .
- Stable performance, supports long time use.
- With large and clear display for better readability.
- Applied for cabinet control, seedling heat mat, aquarium, pet breeding, incubation, BBQ, electric radiator, electric oven, etc.
Set startup temperature(humidity):
Press the “up” button once to display the starting temperature(humidity). Long press the “up” button for about 3 seconds,The required temperature(humidity) can be set by the up and down keys
Set the stop temperature(humidity):
Press the “down”button once to display the stop temperature(humidity). Long press the button for about 3 seconds and the stop temperature(humidity) number flashes. The required temperature(humidity) can be set by the up and down keys
Temperature ( hunidity) correction:
Press “up” and “down button at the same time.
Set start up temperature:
Press the “up” button to the starting temperature. Long press the “up” button about 3 seconds, the desired
temperature can be keys through the up and down The stop temperature:
Press the button to the stop temperature. Long press button about 3 seconds and the stop temperature number flashes. The desired temperature can be tested by the up and down