لاک ڈاؤن کی وجہ سے سامان کی ڈیلوری کا وقت عام وقت سے زیادہ ہو سکتا ہے۔

 
 

XH-M181 PAM8610 12V Dual-Channel Digital Amplifier Board Stereo Audio Amplifier Board

Rs. 170
B 113 , D45,IMP50,Th20,KRT,N91
In stock
+

Description

The PAM8610 is a 10W (per channel) stereo Class-D audio amplifier with DC Volume Control which offers low THD+N (0.1%), low EMI, and good PSRR thus high-quality sound reproduction. The 32 steps DC volume control has a +32dB to -75dB range.

The PAM8610 runs off of a 7V to 15V supply at much higher efficiency than competitors’ ICs. The PAM8610 only requires very few external components, significantly saving cost and board space. The PAM8610 is available in a 40pin QFN 6mm*6mm package.

Main Chip

PAM8610

Power Range

DC 6V-15V (self-protection)

Recommended Voltage

DC 12V(2A)

Output Power

10Wx2(8Ω) 15Wx2(4Ω)

Frequency Response

20HZ-15KHZ

Static Current

20MA (DC12V)

SNR

90% Recommended

Speakers

10-100W

Input Impedance

15K

Output Impedance

4-8Ω

Harmonic Distortion

<0.1%

Dimensions in mm (LxWxH)

30 x 25 x 4

Weight(gm)

12

 

PAM8610 Digital Amplifier Board 2x15W Two Channel Stereo Class-D

How to use:

  1. The power supply voltage limit is 16.5V, do not use more than this voltage.
  2. The power supply is recommended for 12v, 3A power supply filter better
  3. 4-8 inch stereo speakers recommended.
  4. Do not short-circuit the audio output to each other or shorted to ground
  5. Carefully check before electricity, ensure the wiring is correct before electricity.

Features :

  1. This plate with a switching function, SW short, will turn off the power amplifier
  2. Working Mode: Class D (PWM modulation type)

Package Includes :

1 x PAM8610 Dual Channel Stereo Class D Digital Amplifier Board.

Reviews

No posts found

Write a review